Fers Apex CF16 | CPQConfigurableCategory | Official Callaway Golf Preowned Site

Fers Apex CF16 | CPQConfigurableCategory | Official Callaway Golf Preowned Site

Fitting Guide

Please refer to the club fitting guide below to ensure that you purchase clubs with specifications that are best suited to your game. If you don't know your exact specifications, you can still shop with Callaway Golf Europe Certified Pre-Owned. All purchases come with a 14-Day 'No Obligation' Trial Period, so if you're not sure the club you've ordered suits your game, you can return it to us for a full refund on the product price (refer to our Returns Policy for more information)

Choosing The Right Golf Club For Your Game

Callaway Golf Certified Pre-Owned stocks a wide range of pre-owned Callaway Golf, Odyssey Golf and Odyssey Toulon golf clubs. On every product page on the site, there is a grid which displays all of the available stock of that specific club we have for sale. The grid features a number of columns which describe the specification of the golf club, starting with 'Head Hand' on the left-hand side (which always displays either 'Left Hand' or 'Right Hand'). The right-hand side of the grid displays the condition options we have available, from 'Like New' through to 'Average' condition.

Drivers

Head Loft:

Choosing the correct loft in your driver is critical in producing a proper launch angle. Golfers with a slower swing speed will benefit from a higher lofted driver (as it helps to get the ball in the air more easily) and the result will be higher trajectory, longer carry, and greater distance. Look at your average swing speed in order to determine the proper loft for your driver:

*Most Callaway Golf drivers come with a loft setting of 9, 10.5 or 12 degrees of loft, and can be adjusted to either -1 or +2 degrees of loft.

Shaft Flex:

Choosing the right shaft flex for your game is crucial: without the correct flex, golfers will have a harder time making solid contact with the ball on a consistent basis, affecting the direction and distance of their shots. As a general guide, you can determine your shaft flex based on your clubhead speed:

*If you're at the lower end of your clubhead speed category, select a shaft weight at the lower end of the scale, and vice versa.

Shaft Length:

Choosing the correct length of shaft will ensure you have the optimum level of control over your driver. The standard length of a driver is 45.75'' for men and 44.75'' for women. Your height and your level of control over the driver will determine the correct shaft length for you. A shorter golfer should go down 0.5'' to 1''. A golfer with less control over their driver might also consider going down by 0.5'' to 1''.

Irons

Shaft Material:

Irons come with either graphite or steel shafts. Golfers with a lower swing speed would generally perform better with a graphite shaft, as it can help with getting the ball in the air.

Shaft Flex:

Choosing the right shaft flex in your irons is vital in making solid contact with the ball on a consistent basis. With the correct flex, golfers will see more accuracy and longer distance on the shots. Follow this guide for determining which flex and weight is right for your game:

*If you're at the lower end of your clubhead speed category, select a shaft weight at the lower end of the scale, and vice versa.

Head Lie Angle:

Getting the correct lie angle of your iron will ensure the position of the club head at address and impact will strike the ground, rather than the heel or toe. A club which is too upright for a golfer will cause the clubface to close, resulting in a pull or a hook (for right-handed players), which a club which is too flat will hit the ground with the toe, causing the clubface to open and resulting in a push or a slice (for right-handed players).

Use this guide to determine which club length and lie is right for you, based on your height and wrist-to-floor measurement:

Shaft Length:

Selecting the correct club length will ensure the golfer is in the address position which can be maintained throughout the golf swing. Too long a club length will cause a shorter player to stand too upright, while too short a club length will cause a taller player to stoop over the club.

Wedges

Head Loft:

The degrees of head loft in a wedge determine which type of wedge it is. The higher degree of loft in a wedge, the higher the shot.

Head Bounce:

Head Grind:

Shaft Material:

Wedges come with either graphite or steel shafts, although steel shafts are more common. Golfers with a lower swing speed would generally perform better with a graphite shaft, as it can help with getting the ball in the air.

Head Lie Angle:

Getting the correct lie angle of your wedge will ensure the position of the club head at address and impact will strike the ground, rather than the heel or toe. A club which is too upright for a golfer will cause the clubface to close, resulting in a pull or a hook (for right-handed players), which a club which is too flat will hit the ground with the toe, causing the clubface to open and resulting in a push or a slice (for right-handed players).

Use this guide to determine which club length and lie is right for you, based on your height and wrist-to-floor measurement:

Shaft Length:

Selecting the correct club length will ensure the golfer is in the address position which can be maintained throughout the golf swing. Too long a club length will cause a shorter player to stand too upright, while too short a club length will cause a taller player too stoop over the club.

Guide des conditions

Like New

Grip

Always a high quality grip.

Shaft

No signs of any wear or use.No bag wear.

Face

Perfect sharp grooves with scoring lines and paint fully intact.

Sole

May have a few brush marks but otherwise perfect.

Woods Top/Crown

Minor signs of wear from normal use. Paint may have a small scratch or chip, but they will be barely visible.

Irons Topline/Body

Few cosmetic scratches from rubbing against other clubs but medallions and overall condition is great.

Headcover

Matching model specific head cover included.

Very Good

Grip

Always a high quality grip.

Shaft

Slight signs of wear or use. Graphics still in place. No bag wear. May have a few paint chips from rubbing against other clubs but are otherwise structurally perfect.

Face

Polished look of Like New but with slightly more signs of play. All of paint-fill still in the grooves.

Sole

Polished look Like New but with a bit more wear. Light wear from where club has brushed through the grass in play.

Woods Top/Crown

Minor signs of wear from normal use. Paint may have a small scratch or chip, but they will be barely visible.

Irons Topline/Body

Few cosmetic scratches from rubbing against other clubs but medallions and overall condition is great.

Headcover

Generic Callaway Head cover included where the matching original is unavailable.

Good

Grip

Always a high quality grip.

Shaft

Graphics are still completely visible and little, if any, bag wear.

Face

Normal scratches from shot impacts that will not affect performance. Grooves are still sharp and in great condition.

Sole

Normal scratches from a couple of seasons of use. These scratches are common for the polished soles on most Callaway Golf woods. Scratches and wear consistent with steady use but no dents or damage that will affect the weight or structural integrity of the club.

Woods Top/Crown

Might have some small chips or scratches but will not be visible without close inspection.

Irons Topline/Body

Scratches and wear consistent with steady use but no dents or damage that will affect the weight or structural integrity of the club.

Headcover

Generic Callaway Head cover included where the matching original is unavailable.

Average

Grip

Always a high quality grip.

Shaft

Graphics may be worn off in places and paint may have worn away. Shafts are still in perfect working condition

Face

Grooves will have typical wear from frequent play and nicks that will not affect playability. Paint-fill in grooves may be worn or missing in places.

Sole

Typical scratches from heavy use but no imperfections that will affect performance. Such scratches are common on polished soles with most Callaway Golf painted woods. Paint may be missing in areas.

Woods Top/Crown

May have ball marks or pop-up marks where the paint meets the crown. Paint chips more prevalent in areas from rubbing against other clubs in the bag but no dents or damage that will affect performance.

Irons Topline/Body

Normal scratches and nicks from rubbing other clubs that affect appearance, but not the playability of the club.

Headcover

Generic Callaway Head cover included where the matching original is unavailable.

Spécifications

Fers Apex CF16

À partir de 63,00 €

Fers Apex CF16

À partir de 63,00 €

Notre Face Cup leader sur le marché est désormais disponible sur un fer forgé. Les fers Apex CF16 possèdent notre 360 Face Cup leader sur le marché, désormais dans un fer forgé.
14

Essai de 14 jours sans obligation d'achat
Nous vous donnons 14 jours pour tester et retourner les clubs que vous avez achetés si vous n'en êtes pas satisfait.


12 mois de garantie
Tous les clubs d'occasion certifiés que vous achetez sont garantis par Callaway Golf.


Certificat d'authenticité
Vérification que votre achat d'occasion certifié est 100 % Callaway Golf.
Gaucher/Droitier
Gaucher/Droitier
Effacer les filtres
Loft
Loft
Effacer les filtres
Matériel du shaft
Matériel du shaft
Effacer les filtres
Flex du shaft
Flex du shaft
Flex du shaft

Vitesse de la tête de club : Fléxibilité du shaft recommandée

< 60 MPH (97 KM/H) : Lady (<55G)
60 - 70 MPH (97 - 113 KM/H) : Light (55 -75G)
70 - 80 MPH (113 - 129 KM/H) : Regular (55 - 125G)
80 - 90 MPH (129 - 145 KM/H) : Stiff (60-75G)
>90 MPH (145 KM/H) : X-Stiff (85 -120G)

*Si vous faites partis de la catégorie vitesse de tête de club dite 'basse', choisissez un poids de shaft correspondant à cette catégorie, et vice versa.

Plus d'informations
Effacer les filtres
Modèle du shaft
Modèle du shaft
Effacer les filtres
Lie
Lie
Lie

Le lie de la tête de club vs. Standard

Le lie est l'angle formé entre le shaft et le sol lorsque le centre de la semelle touche la ligne du sol en position normale de jeu.

STD: Le lie de la tête de club est standard (Veuillez vous reporter aux spécifications du produit en haut de chaque page du produit correspondant)

Flat (FL): Le lie de la tête de club est supérieur que le lie dit 'standard' par autant d'inches qu'indiqué.

Upright (UP): Le lie de la tête de club est inférieur que le lie dit 'standard' par autant d'inches qu'indiqué.

Plus d'informations
Effacer les filtres
axe_longueur_offset
axe_longueur_offset
Effacer les filtres
Condition
Condition
Like New
Very Good
Good
Average
Effacer les filtres
0/0
Temporarily out of stock.

Caractéristiques et avantages

  • Distance avec jouabilité

    C'est notre première Face Cup dans un fer forgé. Nous avons utilisé notre technologie leader Face Cup 360 qui a redéfini la vitesse de la balle des bois de fairway et des fers, et avons conçu avec précision la face cup pour vous donner une vitesse de balle constante sur toute la face dans un design d'Apex forgé.

  • Performance du set

    L'offset progressif, la largeur de la semelle, la hauteur du CG et la répartition du poids dans l'encoche permettent le bon équilibre entre le vol de la balle, la jouabilité, la tolérance et le contrôle pour chacun des fers. Les fers plus longs présentent plus d'offset là où vous en avez besoin pour plus de tolérance, tandis que les fers plus courts ont une forme plus compacte avec moins d'offset pour la sensation et le contrôle.

  • Construction multi-pièce

    L'ensemble du set bénéficie de cette construction haute technologie et offre une combinaison remarquable de distance, de sensation et de contrôle à n'importe quel joueur. Les fers plus longs (3-7) utilisent la Face Cup 360 pour augmenter la vitesse de balle et la tolérance sur toute la face. Nous avons inclus une plaque frontale unique dans les fers plus courts (8-AW) pour améliorer la sensation et le contrôle de la distance.

  • Sensation extrêmement douce grâce au forgeage de technologie avancée

    Nous avons appliqué un forgeage quadruple extrêmement précis et un fraisage de précision, et utilisé un acier au carbone doux 1025 pour produire un nouveau standard de sensation incroyablement douce dans un fer forgé.

  • Offre de shafts premium

    Offre de shafts True Temper XP 95 en acier avec un large choix d'options de shafts en acier sans frais supplémentaires.